QSC Q-SYS PS-1650G User Manual Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 27
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
9. To run the low frequency test, modify \simulation_tutorial\test_include.svh according to Table 4.
Table 4: Values for Low Frequency Pattern Test
Macro New Value
PATTERN_POSITION 0
NUM_OF_PATTERN 2
NUM_OF_PAYLOAD_BYTES 256
FILENAME low_freq.hex
FILENAME_REV low_freq_rev.hex
10.Reload the load_sim.tcl script, run the simulation for 40us, and observe the result in the Transcript
window.
INFO: top.pgm: Starting test low_freq.hex
INFO: top.pgm.read_file: Read file low_freq.hex success
INFO: top.pgm.read_file: Read file walking_ones_rev.hex success
INFO: top.pgm: Test low_freq.hex passed
11.To run the random number pattern test, modify \simulation_tutorial\test_include.svh according to
Table 5.
Table 5: Values for Random Number Pattern Test
Macro New Value
PATTERN_POSITION 32
NUM_OF_PATTERN 64
NUM_OF_PAYLOAD_BYTES 1024
FILENAME random_num.hex
FILENAME_REV random_num_rev.hex
12.
Reload the load_sim.tcl script, and run the simulation for 40us to observe the following results.
INFO: top.pgm: Starting test random_num.hex
INFO: top.pgm.read_file: Read file random_num.hex success
INFO: top.pgm.read_file: Read file random_num_rev.hex success
INFO: top.pgm: Test random_num.hex passed
View a Diagram of the Completed System
You set up the simulation environment for the custom pattern generator component and used BFM test
code to perform simulation. You can test your own custom Qsys components with this method to verify
their functionality before you integrate them into a complete system. You can also create a testbench
system for a complete Qsys system with this method, and test your top-level system behavior with BFMs.
On the Qsys Tutorial Design Example page, click detailed diagram under Block Diagram to view a
detailed diagram of the completed Memory Tester System.
26
View a Diagram of the Completed System
TU-01006
2015.05.04
Altera Corporation
Qsys System Design Tutorial
Send Feedback
Page view 25
1 2 ... 21 22 23 24 25 26 27

Comments to this Manuals

No comments