QSC CX302, CX502, CX702, CX902, CX1102, CX254, CX404, CX204V, CX302V, CX602V, CX1202V User Manual download pdf (Page 4)

Rack Mounting

Optional handles shown. Use four screws and washers to

mount the amplifier to the equipment rack rails. To use the

amplifier outside a rack, attach the self-adhesive

rubber feet to the bottom.

Cooling

Air flows from the rack, into the back of the amplifier,

and out the front. This keeps the rack cool. The fan

automatically runs faster when the amp is

working hard.

Do not block the front or rear air vents!

AC Mains Connection

Connect AC power to the IEC socket on the back of the amplifier. NOTE: Turn off the AC power switch before connecting AC power.

The AC Switch must be turned on to use remote control systems or the Standby function.

The correct AC line voltage is shown on the serial number label, on the rear panel. Connecting to the wrong line voltage may damage

the amplifier or increase the risk of electric shock.

Air flow in QSC amplifiers: Cool air is drawn into

the rear of the amplifier by the cooling fan. Warm

air exits the front of the amplifier.

1- CH1 Terminal Block Input Connectors

2- DataPort Connector

3- CH2 Terminal Block Input Connectors

4- Mode Switches

5- Barrier Strip Output Connectors

6- Cooling Air Inlet Vents

7- Mode Switch Setting Diagrams

8- IEC Power Connector

Rear Panel

(CX404 shown, other models similar, 2-Ch. models equipped with XLR inputs as well)

1 2 3 4 5 6 7 8 9 ... 62 63

No comments

QSC CX302, CX502, CX702, CX902, CX1102, CX254, CX404, CX204V, CX302V, CX602V, CX1202V User Manual Page 4