1 (DRAFT 2014/08/09) CXD-Q AmplifiersUser ManualCXD4.2Q — 4 Channel, 1600 W Amplifi erCXD4.3Q — 4 Channel, 2500 W Amplifi erCXD4.5Q — 4 Channel,
10 (DRAFT 2014/08/09) 4. FIRMWARE: The Q-Sys Designer fi rmware version. To update the fi rmware: a. The version you want to use must be installed
11 (DRAFT 2014/08/09) Output Gains ScreenThe Output Gains screen provides a quick overview of all outputs and is the screen on which GAIN adjustm
12 (DRAFT 2014/08/09) Specifi cationsCXD-Q 4.2 CXD-Q 4.3 CXD-Q 4.54 Channel100 Vrms70 Vrms842BurstN/AN/A500 Watts700 Watts600 WattsContinuousN/
13 (DRAFT 2014/08/09) Heat Loss ChartsHeat losses are the thermal emissions from an amplifi er while it is operating. It comes from dissipated was
14 (DRAFT 2014/08/09) Mailing Address:QSC Audio Products, LLC1675 MacArthur BoulevardCosta Mesa, CA 92626-1468 USATelephone Numbers:Main Number:
2 (DRAFT 2014/08/09) EXPLANATION OF SYMBOLSThe term “WARNING!” indicates instructions regarding personal safety. If the instructions are not foll
3 (DRAFT 2014/08/09) FCC StatementFor CXD-Q 4.3 and CXD-Q 4.5NOTE: This equipment has been tested and found to comply with the limits for a Class
4 (DRAFT 2014/08/09) Rack-Mount the Amplifi er1. Secure the amplifi er in the rack with eight screws (not supplied), four in front, four in back.U
5 (DRAFT 2014/08/09) FeaturesAmplifi er Front Panel— Figure 2 — GAINABOUTPUTCDMUTEMUTEMUTEMUTESELSELSELSELLIM-10-20CLIPSIGINPUT1243CXDQNETWORKAMPL
6 (DRAFT 2014/08/09) ConnectionsQ-Sys Q-LANConnect the amplifi er LAN A, and if available, LAN B, to the Q-LAN network. (Figure 4) Refer to your Q
7 (DRAFT 2014/08/09) Bridged (A+B) and Separate (C D) Channels Parallel Channels (ABCD) Connect the Loudspeakers 1. Con
8 (DRAFT 2014/08/09) Amplifi er Control NOTE: The following scenarios assume that the amplifi er is connected to the Q-Sys Core via Q-LAN. When
9 (DRAFT 2014/08/09) Inputs and OutputsThe CXD-Q amplifi ers have four Mic/Line Inputs and four amplifi ed Outputs on the rear of the amplifi er.
Comments to this Manuals