Amplifier control and monitoring, configurable DSP, 4 analog line-level inputs via XLR connectors, 16
analog outputs via DataPort, CobraNet I/O
Amplifier control and monitoring, configurable DSP, 8 analog inputs via euro style connectors, 8 analog
outputs via DataPort connectors, CobraNet I/O
Amplifier control and monitoring, configurable DSP, AES/EBU input pairs (8 channels) via 25-pin DB-25
connectors, 8 analog outputs via DataPort connectors CobraNet I/O
Amplifier control and monitoring, configurable DSP, 8 analog universal (mic/line) inputs via euro style
connectors, 8 analog outputs via DataPort connectors, CobraNet I/O
Configurable DSP, 8 analog universal (mic/line) inputs via euro style connectors, 8 analog outputs via
euro style connectors
CobraNet I/O, configurable DSP, 8 analog universal (mic/line) inputs via euro style connectors, 8 analog
outputs via euro style connectors
Network audio controller for QSControl.net systems; color graphic display, POE (Power Over Ethernet);
available in black (NAC-100) or white (NAC-100-WH)
DIGITAL SIGNAL PROCESSORS
DSP-3
2 channel digital signal processor with euro style input/output connectors, small form factor
2 channel digital signal processor with Combo XLR input/output connectors, 1 RU
2 channel digital signal processor with XLR input/output connectors, small form factor
2 x 8 processor for QSC loudspeakers
DIGITAL / NETWORK ACCESSORIES
WCP-1
Wall Control Plate with Rotary Potentiometer
Wall Control Plate with Rotary BCD Switch
Unterminated Custom DataPort Cable per foot
DataPort cable, HD15 connector, 1 ft. length
DataPort cable, HD15 connector, 2 ft. length
DataPort cable, HD15 connector, 3 ft. length
DataPort cable, HD15 connector, 4 ft. length
DataPort cable, HD15 connector, 5 ft. length
DataPort cable, HD15 connector, 6 ft. length
DataPort cable, HD15 connector, 10 ft. length
DataPort cable, HD15 connector, 20 ft. length
DataPort cable, HD15 connector, 50 ft. length
DataPort cable, HD15 connector, 75 ft. length
DataPort cable, HD15 connector, 100 ft. length
Custom DataPort cable passes audio and power between an amplifier and a remote mounted DSP-3 or
DSP-4 module
Null modem cable programming a DSP-3 manufactured before July 1999
Accessory bracket kit mounting up to four DSP-3 or DSP-4 modules, shipped with hardware for mounting
on rear racks
DataPort Accessory card, converts an HD15 connector on DataPort amplifiers to a terminal block style
connector. Also provides audio signal access when connected to the outputs of DataPort-equipped
processors.
DataPort accessory card, converts an HD15 connector on DataPort amplifiers to a terminal block style
connector. Same as DDI-3, except DataPort connector is right angle mounted. Provides access to the
amplifier's 15Vdc output, standby control connectivity
DataPort accessory card, with two fully isolated and balanced transformer-coupled inputs.
Non-Configured Q-SYS CORES and "KIT" PRODUCTS (I/O Cards are shipped separately, and must be installed by customer)
64 network I/O channels, accommodates 8 I/O cards, dual Ethernet ports for network redundancy, and
two GPIO ports, 2RU (Field Configurable)
128 network I/O channels, accommodates 8 I/O cards, dual Ethernet ports for network redundancy, one
auxiliary Ethernet port, and two GPIO ports, 2RU (Field Configurable)
MTP-128 KIT Multi-Track Playback Option - up to 128 Channels; must be ordered with a Core and a Media Drive.
Small Media Drive Kit - Provides a minimum of 130 hours of audio storage. The media drive can store
and reproduce WAV and MP3 audio files. (Field Configured-packaged individually)
Medium Media Drive Kit - Provides a minimum of 260 hours of audio storage. The media drive can store
and reproduce WAV and MP3 audio files. (Field Configured-packaged individually)
Large Media Drive Kit - Provides a minimum of 1200 hours of audio storage. The media drive can store
and reproduce WAV and MP3 audio files. (Field Configured-packaged individually)
1 RU I/O frame, accommodates four slot cards, dual Ethernet ports for network redundancy, and one
GPIO port (Field Configurable)
Four channels of microphone / line-level analog audio input with high performance pre-amplifiers and 48V
phantom power (Field Configured-packaged individually)
Four channels of microphone / line-level analog audio input with 48V phantom power (Field Configured-
packaged individually)
COL4 KIT Four channels of balanced, line-level analog output (Field Configured-packaged individually)
Four channels of AES-3 digital audio with channel pairs configurable as input or output (Field Configured-
packaged individually)
Four channels (2 DataPorts) for connection to DataPort equipped QSC amplifiers (Field Configured-
packaged individually)
Comments to this Manuals