QSC WL2102 User Manual

Loudspeaker User ManualWL2102 – Cored composite enclosureWL2102-w – Birch plywood enclosureAF2102-LA – Large aluminum array frame WL SMALL GRID – Smal

910Stacking the WL SMALL GRIDThe WL SMALL GRID comes with two aluminum I-bars used for aligning and securing the frame to QSC’s 215SB or 215PCM subwoo

910WL2102 WL2102-wConfiguration Bi-amp or tri-amp modeTransducersLow-frequencyHigh-frequency2 x 400 W, 16Ω 10" woofer, 3" voice coil, ceram

Mailing Address:QSC Audio Products, LLC1675 MacArthur BoulevardCosta Mesa, CA 92626-1468 USATelephone Numbers:Main Number: (714) 754-6175Sales & M

12IMPORTANT SAFETY PRECAUTIONS AND EXPLANATION OF SYMBOLSInstall in accordance with instructions by QSC Audio Products, LLC instructions and under the

12IntroductionThe WideLine-10 loudspeaker system has been designed to provide a compact system that has unique dispersion characteristics, high-power

34TRI AMP/BI AMP SwitchTRI AMP: Shading network is NOT applied (shading must be provided by upstream signal processing). Connect the full-range input

34Input ConnectionsThe input connectors are a pair of Neutrik NL8’s wired in parallel. Connections for bi-amp and tri-amp vary (Table 1). The pin desi

56RiggingRules for SuspensionCorrect use of all suspension hardware and components is imperative in sound system rigging and deployment.•Always calcu

56RiggingWideLine-10 enclosures use a three-point suspension system. The system consists of front, left/right, captive articulated joints and a single

78Adjusting the Angle Between Enclosures (Splay)The illustration shows the rear pin block of two enclosures joined by the upper enclosure’s rear link

78AF2102-LAThe link arm is located on the bottom side of the frame assembly. Use this link for attaching the rear of the first enclosure. The frame all