QSC SR-110 User Manual download pdf (Page 2)

Dimensions QM-SW Dimensions QM-BW

Step 1. Locate mounting area where the

loudspeaker will be installed. It must be a

structurally sound area with adequate

strength to support at least five times the

weight of the loudspeaker.

Using the bracket as a template with the

narrow end pointing up, mark the selected

hardware locations onto the mounting

surface. Select and install the appropriate

mounting hardware (not included). If you

are not sure about the correct hardware

for the mounting surface, consult a profes-

sional engineer. Ensure the bracket is se-

cured to the mounting surface before

attaching the loudspeaker.

Step 2. Lower the loudspeaker onto the

bracket making sure the slot on the loud-

speaker’s bracket fully engages the wall

bracket. Verify correct mounting before in-

stalling the retaining bolts.

Step 3. Install the two retaining bolts

and tighten them securely.

Installation and Use

Mounting

Surface

Structural supporting material.

QM-SW

Bracket

Note! Open end of wall bracket

is to be on the bottom when

mounted. Bracket will not func-

tion if installed otherwise.

Top

Top

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments