QSC Q-SYS TSC-8-WH User Manual

1™Hardware User ManualTSC-8-BK – Networked 8.4" Touchscreen Controller – BlackTSC-8-WH – Networked 8.4" Touchscreen Controller – WhiteTSC-8-

10UnpackingThere are no special unpacking precautions. However, it is recommended that you keep the original packing materials for reuse in the rare e

11Mounting the TSC-8 in an Existing Wall or PodiumThis procedure covers mounting the Back Box with Flange in an existing wall or podium.CAUTION!: Bef

12Mounting the TSC-8 in a Wall Under ConstructionNOTE: The studs in the wall where the TSC-8 is to be mounted, must be no more than 15 1/2 in (393 mm

1316. After wall construction is complete (including texture and paint), install the Flange (6) into the Back Box using six screws (7). Make sure that

14Computer Requirements & Software InstallationConfiguration of the TSC-8 requires a Q-Sys Core Processor and a PC running Q-Sys Designer software.

15Using the Status PageThe Status Page provides status information, and a number of controls. To access the Status Page:• If the unit is not running

16Reset ButtonsThere are two pin holes on the bottom of the TSC-8 bezel. There is a button in each of holes used to restart or reset the TSC-8. Refer

17TSC 8 DimensionsThe dimensions include the touchscreen and the Back Box assembled, without the new-construction mounting brackets.— Figure 13 — 7. 6

18TSC-8 SpecificationsProcessing CPU 1.8 GHz Intel ATOM D525Memory Internal RAM 1 GB DDR3 External non-volatile CompactFlash driveFront Panel Control

2EXPLANATION OF TERMS AND SYMBOLSThe term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result

Mailing Address:QSC Audio Products, LLC1675 MacArthur BoulevardCosta Mesa, CA 92626-1468 U.S.Main Number: (714) 754-6175World Wide Web: www.qscaudio.c

3FCC StatementNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Ru

4RoHS STATEMENTThe Q-Sys TSC-8-BK and TSC-8-WH products are in compliance with European Directive 2002/95/EC – Restriction of Hazardous Substances (Ro

5IntroductionQ-Sys is a platform of software and hardware products that provide the system designer and system operator with all the tools necessary t

6TSC-8 Front Panel Features — Figure 1 — 1321. Capacitive-touch control surface and LCD viewing area (8.4" diagonal)2. Bezel mounting points3.

7TSC-8 Rear Panel and Connector Edge Features— Figure 2 — 65 7 84 9 1023101111. Cooling fins2. Mounting point Standoff slots3. Flange Standoff slots

8TSC-8-BX Back Box Features— Figure 3 — 13456789210111. Mounting Brackets2. Mounting Bracket screws, M3x5L, large-dia., truss-head, Phillips (10)3.

9The Q-Sys Q-LAN NetworkThe Q-Sys solution (Figure 4) is designed to be deployed on QSC’s high performance Q-LAN network. Q-LAN is a proprietary netwo