QSC WL2102 User Manual

TD-000227-00 rev.B*TD-000227-00*ISIS WideLine Loudspeaker User ManualManual del usuario para los altavoces ISIS WideLineManuel de l'utilisateur d

10Stacking the Stacking FrameThe Stacking Frame comes with two aluminum I-bars used for aligning and securing the frame to QSC’s 215SB or 215PCM subwo

11System Specifications (subject to change without notice)Configuration: Three way, bi amp or tri ampFrequency Response1: 55 - 18,000 Hz (+/- 3 dB)Fre

12Dimensions- WL2102 and WL2102-wNOTE! Composite enclo-sures have approximately 1° of draft on the enclosure sides; the birch plywood enclosures do no

13

QSC Audio Products, Inc. 1675 MacArthur Boulevard Costa Mesa, California 92626 USA©2006 “QSC” and the QSC logo are registered with the U.S. Pa

2IMPORTANT SAFETY PRECAUTIONSInstall in accordance with QSC Audio Product's instructions and under the supervision of a licensed Professional Eng

3IntroductionThe WideLine loudspeaker system has been designed to pro-vide a compact system that has unique power handling, fre-quency response. Its p

4TRI AMP/BI AMP SwitchTRI AMP: Shading network is NOT applied (shading must be provided by upstream signal processing). Connect the full-range input s

5Input Connections The input connectors are a pair of Neutrik NL8's wired in parallel. Connections for bi amp and tri amp vary, see Table 1. The

6Rigging Rules for Suspension •Correct use of all suspension hardware and components is imperative in sound system rigging and deployment.•Always calc

7RiggingWideLine enclosures use a three-point suspension system. The system consists of front, left/right, captive articulated joints and a single rea

8Adjusting the Angle Between Enclosures (Splay)The illustration shows the rear pin block of two enclosures joined by the upper enclosure’s rear link a

9Fly Grid The mounting plate and link bar are located on the bottom side of the frame assembly. Use this link for attaching the rear of the first encl